Roadsides and vacant land get overgrown
The strip along the road gets mowed once a season, and every pass means people with brush cutters on the roadside, right next to traffic.
A tracked robot with a flail mower cuts grass on roadsides and rights-of-way without a crew: one operator sets the route. It cuts giant hogweed before it goes to seed and clears turnoffs in winter.

The strip along the road gets mowed once a season, and every pass means people with brush cutters on the roadside, right next to traffic.
It has to be cut several times a summer, before it sets seed. There is nobody to cover every roadside, vacant lot and field edge by hand inside that window.
The flail mower on VETER TEGU cuts the strip along the road; the machine holds an embankment of up to 30° on dry ground. Nobody has to step into the road.
As many passes as the summer calls for: the route is recorded, and the machine reruns it before the plants set seed.
Blade and dump bed: clearing turnoffs, hauling away sweepings and branches.
The snow blower clears turnoffs, bus stops and rest areas - same chassis.
Moves heavy loads around the orchard, the field and the farmyard. At harvest it hauls crop or other cargo out of the rows: in follow mode it stays right behind the operator, and on a recorded route it runs the rows by itself. Swap the module with the season: harvest hauling and mowing in summer, snow in winter.
Shreds grass and brush on roadsides and between rows. Available in both lines.
Clears roads and grades lots. Available in both lines.
Hauls and dumps crops, soil, tools and supplies. Available in both lines.
Clears snow from roads and lots. Available in both lines.
On tracks, the robot gets through snow and mud and turns in place. On dry ground it climbs grades of up to 30 degrees.
From then on, the robot repeats it to within centimeters. Between buildings and indoors, where there is no satellite signal, it navigates by lidar.
The whole farm is on the tablet's map: assign a job in two taps and see the robot's status right on the screen.
It climbs up to 30° on dry ground, on tracks 400 mm wide, with a ground pressure of 3.5 kPa.
One operator, who records the route and monitors the work from a tablet. No crew on the roadside.
The route is recorded to within centimeters using satellite navigation, and a dedicated algorithm stops the machine for obstacles and people.
1300 mm wide and 2200 mm long. The flail mower's working width is available on request.
Describe the job and the conditions, and we'll tell you whether a standard machine will handle it or it calls for custom work.