Remote-controlled
The operator drives the machine with an RC transmitter, keeping it in sight from a distance. The emergency stop is always a thumb press away.
Hauls loads, mows grass and clears snow in residential communities, courtyards and work sites. Flail mower in summer, snow blower in winter: the operator drives it by remote, or the machine runs a recorded route by itself. It is narrow enough for gaps between buildings and tight courtyards where a bigger machine has no room to turn.
The operator drives the machine with an RC transmitter, keeping it in sight from a distance. The emergency stop is always a thumb press away.
The machine repeats a recorded route, trails the operator in follow mode, and stops for obstacles and people. Jobs are assigned from a tablet.
The machine, 1 battery and a remote. Attachments and extra batteries are quoted separately. For delivery and operator training, see Sales & service.
Clears snow from roads and lots. Available in both lines.
Hauls and dumps crops, soil, tools and supplies. Available in both lines.
Clears roads and grades lots. Available in both lines.
Shreds grass and brush on roadsides and between rows. Available in both lines.
On tracks, the robot gets through snow and mud and turns in place. On dry ground it climbs grades of up to 30 degrees.
From then on, the robot repeats it to within centimeters. Between buildings and indoors, where there is no satellite signal, it navigates by lidar.
The whole farm is on the tablet's map: assign a job in two taps and see the robot's status right on the screen.
On sidewalks, in courtyards and at building entrances: it is 1100 mm wide and turns in place. Loads over 200 kg are a job for VETER TEGU.
4 to 12 hours, depending on load. A second battery fits the standard slot and is sold separately.
The machine with one battery and a remote. Attachments and the second battery are quoted separately; for delivery and operator training, see Sales & service.
The VETER SCINK line: snow blower, dump bed, blade and flail mower.
Describe the job and the conditions, and we'll tell you whether a standard machine will handle it or it calls for custom work.